OVERVIEW
A Direct-Vent system uses two vent pipes. One draws air in from outdoors to support combustion. The other exhausts the by-products of combustion to the outside. The two vent pipes may be concentric (exhaust pipe within a larger diameter intake pipe) or co-linear (separate pipes of about the same size).
Combustion takes place inside a sealed chamber – with a glass front in the case of a fireplace. Room air circulates around the combustion chamber, often assisted by a blower, to heat the room.
A DV system is often installed along an outside wall to simplify the vent run, but can also be installed elsewhere in the home and vented through the roof.
Advantages:
- Good efficiency – 60 to 80%
- Good heat output with thermal transfer through the glass and air circulation
- Separates room air from the combustion air
- May be used as a primary heat source
- Can operate with a remote or thermostat
- Most systems can provide live-saving heat during a winter power outage
Boulevard See-Through Linear Direct-Vent Fireplaces
The new Boulevard 48 Direct-Vent See-Through fireplace features a true 48-inch viewing area, fully recessed burner, and white LED underfloor lighting. This system installs in an interior wall to brighten adjoining rooms – or in an exterior wall with the optional stainless steel outdoor kit for a beautiful view, indoors and out. Customize the look with liners, logs, fronts, and decorative glass.
Ceramic Glass: 13 x 48
Venting: 5 x 8 Top Vent Only//Requires 12-inch min. vent rise
Framing 51-3/4 H x 68 W x 19-1/2 D (indoor wall)
Framing 51-3/4 H x 68 W x 21-1/4 D (outdoor wall)
Includes:
- Multi-Function Remote to control burner and white LED accent lighting
- Ceramic Glass
- Barrier Screen
- Noncombustible Board for top (x2)
Requires:
- Liner
- Decorative Crushed Glass (8 sq.ft. required, additional decorative media may be added as accent)
This fireplace installs as -
Conventional See-Through on an interior wall. Requires finishing to the fireplace opening on both sides with plaster/tile/stone/brick - with or without decorative frames.
Indoor/Outdoor See-Through on an exterior wall. Requires finishing to the fireplace opening on
the interior side with plaster/tile/stone/brick - with or without a decorative frame.
Exterior wall requires special framing and the Exterior Decorative Front (DFED489SS)
FEATURES
- Includes Multi-Function Remote
- Barrier Screen
- Requires Purchase of Liner
- Ceramic Glass
- Requires + 24-lbs of media, sold separately
- Interior or Interior/Exterior Application
- Direct Vent Multi-Function Remote Control with Variable Thermostat Remote Control
- 13 x 48 Viewing on both sides, 5x8 Venting (top only)
*Please Note: Shown with Ledgestone Liner, Matte Black Trim Kit, and Clear Frost Crushed Glass (all purchased separately). Check all these accessories in OPTIONS & ACCESSORIES section.
*Please Note: Upgrade your fireplace burning display with given optional media options. Clear, Copper, or Bronze are required to allow the lighting to show through. Other Colors as accent only
OPTIONS & ACCESSORIES
Click to see Liner Kits
|
|
Ledge Stone Liner
- Type: Liner
- Finish: Ledge Stone
|
 |
Black Porcelain Liner
- Color: Black
- Reflective quality amplifies the flames, making the fire appear larger
- Simple assembly can be completed after fireplace installation
- Durable ceramic coating over steel will not chip or fade
|
Exterior Frame
 |
Stainless Steel Frame for Exterior Installation
- Size: 48 Inches
- Color: Stainless Steel
- Optional accessory
- Exterior decorative front
- Stainless steel construction
- For indoor/outdoor installations
|
Accessories
|
7-piece Ceramic Fiber Log Set, Rocks and 5 Stainless Steel Coils
- Size: 48 Inches
- Fireplace Type: Standard
- Vent Type: Vented
- Includes a unique assortment of ceramic fiber logs and stones, plus coiled slivers of stainless steel that react to the light and flames to bring your fireplace to life
- Accompanied with 5 stainless steel coils
|
Click to see Decorative Media
 |
Glacier Ice Decorative Glass Droplets
-
Model: DG1GC
- Designed for use with contemporary gas burner systems
- For use in a single layer on glass burner trays
- Install only to manufacturer specifications
- Reflective nature amplifies burner flames
|
 |
Sangria Luster Decorative Glass Droplets
-
Model: DG1SL
- Designed for use with contemporary gas burner systems
- For use in a single layer on glass burner trays
- Install only to manufacturer specifications
- Reflective nature amplifies burner flames
|
|
|
Black Polished Crushed Glass
-
Model: DG1BKP
- Covers burner ports and provides a unique appearance
- Install only to manufacturer specifications
- Reflective nature amplifies burner flames
|
 |
Blue Clear Crushed Glass
-
Model: DG1BUC
- Covers burner ports and provides a unique appearance
- Install only to manufacturer specifications
- Reflective nature amplifies burner flames
|
|
|
Clear Frost Crushed Glass
-
Model: DG1CLF
- Covers burner ports and provides a unique appearance
- Install only to manufacturer specifications
- Reflective nature amplifies burner flame
|
 |
Copper Reflective Crushed Glass
-
Model: DG1BCR
- Covers burner ports and provides a unique appearance
- Install only to manufacturer specifications
- Reflective nature amplifies burner flames
|
 |
Bronze Reflective Crushed Glass
-
Model: DG1BZR
- Covers burner ports and provides a unique appearance
- Install only to manufacturer specifications
- Reflective nature amplifies burner flames
|
 |
Decorative Stone Assortment
-
Model: DR1FMA
- Designed for use with contemporary gas burner systems
- Can be used on conjunction with fire glass for a unique presentation
- Install only to manufacturer specifications
- Varied colors and textures
- Durable heat resistant ceramic construction and dyes
|
 |
Decorative Pebble Assortment
-
Model: DRFPA
- Designed for use with contemporary gas burner systems
- Can be used on conjunction with fire glass for a unique presentation
- Install only to manufacturer specifications
- Varied colors and textures
- Durable heat resistant ceramic construction and dyes
|
Click to see Decorative Fronts Options
|
|
Forged Iron Front, 3 inch
- Color: Black / Distressed Pewter / Oil-Rubbed Bronze
- 3-inch wide perimeter frame width
- Handsome and rustic distressed iron construction
- Capable of adjusting from 1/4 inch to 1 1/2 inches in depth
- Conceals unfinished edges of the fireplace finish material
|
|
|
Matte Black Trim Kit, 1 inch
- Color: Black
- Trim kit features a beveled design that is adjustable
- Provided in an attractive black finish
- Hides the edges of the finishing material
- Adjusts from 1/4 inch to 1 1/2 inch depth
|
|
|
Pewter Trim Kit, 1 inch
- Color: Hammered Pewter
- Decorative adjustable front in a hammered pewter finish
- Capable of adjusting from 1/4 inch to 1 1/2 inches in depth
- Conceals the edges of the finishing material
- 1-inch frame width
|
 |
Beveled Frame
- Color: Black / Nickel / Bronze
- 1 1/2 inches thick
- Adds a decorative frame to the front of your fireplace
- For Boulevard direct-vent fireplaces
- Comes in textured black, brushed nickel, or oil-rubbed bronze finish
|
DOWNLOADS
